Dash Indicator Bulb Harness, MC21
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
This will fit the Honda NSR250 MC21 but also may fit other Honda models.
TYGA no: TYWH-0003
SKU: hon-10747 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsSilencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon chain guard, Yamaha YZF-R125 2009 –
€117.41
Chain Guard (Carbon), Yamaha YZF-R125 2009-2014
Direct replacement from original Yamaha part
Handlebar Clamp, Right, Silver, 50 mm.
€98.58
Replacement Right handlebar clamp for handlebar set TYLY-0078
Upper cowling street with air duct, Aprilia RS250 Tyga, assy
€243.41
This upper cowling is to be used in our Aprilia RS-250 kit, BPFS-0100.
This product is compatible with lower cowling BPFL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPFU-9030
SKU: apr-10045 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopTankcover front RVF, NC35
€92.82
This is a GRP reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPFX-9201 to make a full tank cover for the NC35.
TYGA no: BPFX-9101
SKU: hon-10143 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopKit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
€432.66
Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0197 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0198
SKU: hon-11057 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30