Triple clamp CNC black, KTM RC125/RC200/RC390 2014 – 23
€196.92
Top Triple Clamp, CNC Black, KTM RC Series
CNC machined TYGA top triple clamp with detachable ignition lock holder for your KTM RC Series motorcycle.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1073 with detachable ignition switch holder TYLY-1173.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: TYLY-1073(p)
SKU: ktm-10071 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, ShopCowling Right Blue, Honda MSX125 GROM
€23.35
Cowl, L., RR., Blue
TYGA no: 77215-K26-900ZE
SKU: MSX-10228 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon battery/tank box cover, KTM RC125/RC200/RC390
€525.79
Tank/Battery Cover, (Carbon), KTM RC125, RC200, RC390
This component replaces the nasty plastic items, adds class to your ride and is an easy installation.
This product can also be ordered seperately as battery box cover BPCX-7431A and tank cover BPCX-7431B, however please note that BPCX-7431 cannot be used with the stock battery cover.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCX-7431Â
SKU: ktm-10034 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopPassenger seat cover red, Honda MSX125 GROM
€187.90 €132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red as shown in the main photo. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R
SKU: MSX-10148 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopVHM blind insert, Honda NSR150
€52.95
VHM Blind Insert for the NSR150/300.
Machine your own profile for special fuels or applications.
All necessary O-ring grooves are pre-machined.
TYGA no: AE32078-A
SKU: alg-10095 Categories: ALL products, Honda, NSR150SP, Shop, Various parts, VHM productsStainless silencer 380mm
€231.41
Silencer, Stainless, Round, Four Stroke, 50.8mm., Assy
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
TYGA no: EXSL-0064
SKU: kaw-10066 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersTyga Step Kit Replacement Link Rod, 238mm
€16.92
Tyga Step Kit Replacement Link Rod, Male, 238 mm.
Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.
Carbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, Shop