Racing step kit, Honda VFR750 (gen 4) 1994 -’97
€424.38
Racing Step Kit, Honda VFR750, Gen4 (1994-1997)
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance, these CNC machined step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners and all the required hardware.
Includes rear brake light provision, and retains the standard exhaust guard.
Carbon heel guards are included for both left and right hangers.
Peg position is 10 mm. up and 10 mm. back. Pitch of hanger to frame mounting holes is 78.6 mm.
TYGA no: STAA-0030
SKU: hon-11211 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Screen clear stock shape, Suzuki RGV 250 VJ23
€52.00
Screen clear stock shape, Suzuki RGV 250 VJ23
TYGA no: SCRE-0064
SKU: suz-10133 Categories: ALL products, CNC parts, Honda, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250Carbon rear hugger, Honda CBR600 2005-16
€142.48
Direct replacement for the nasty plastic hugger. Weighs a fraction of the original and makes your bike stand out from the crowd.
Please note TYGA logos are applied over the clearcoat and can easily be removed.
TYGA no: BPCH-7206
SKU: hon-10011 Categories: ALL products, Carbon, CBR600RR 2005- 6, CBR600RR 2007- 16, Honda, ShopClutch Lever, Ninja 250R 2008 -12
€32.76
Clutch Lever, Ninja 250R 2008 -12
TYGA no: 46092-0030
SKU: kaw-10189 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopAthena cylinder set with piston (pair), set 3 Aprilia RS250 – Suzuki RGV250
€1,914.11 €1,646.15
This cylinder kit is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.
TYGA no: P40001010001
SKU: alg-10446 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsHandle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsFront Fork Preload Adjusters black/gold (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Black/Red
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in black and gold anodised finish, (see TYLY-0097 and TYLY-1097 for other colour versions too) these adjusters are as beautiful as they are functional.
Carbon tank filler cap cover cover, Suzuki RGV 250
€34.06
Carbon Tank Filler cap Cover. Fits Suzuki RGV250, and other models.
TYGA no: BPCC-0010
SKU: suz-10003 Categories: ALL products, Bodywork and carbon, Carbon, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various parts