Carbon engine covers (pair) 2014- ’15, KTM Duke – RC390
€240.76
Carbon engine covers (pair) 2014- ’15, KTM Duke – RC390
This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note on the left cover: This product does not fit the 2016 model KTM Duke – RC390 due to a revised design of the left side engine cover.
2014-2015 Model, Left engine case, KTM part number: 90230002133 (BPCC-7331L fits)
2016 Model, Left engine case, KTM part number: 93730002000 (BPCC-7331L does not fit)
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCC-7331
SKU: ktm-10056 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2012-16, KTM, RC 390, ShopTyga Step Kit Replacement M6 RH M. rod end, NSR150/250
€11.47
Replacement left hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: Stre-0106
SKU: hon-11527 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopCarb Service Kit A, 20 pieces, Honda CBR250RR MC22
€40.95
Carb Service Kit A, 20 pieces, Honda CBR250RR MC22
LiteTek Carburettor Seal Kit to suit
Honda CBR250RR MC22
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-KAZ-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-KAZ-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-KAZ-000)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-KAZ-000)
TYGA no: CKA-Honda-MC22
SKU: alg-10361 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, HondaExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Top triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon engine covers left, KTM Duke – RC390 2014- 15
€120.42
Engine Cover, (Carbon), Left, KTM RC390
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note: This product does not fit the 2016 model KTM RC390 due to a revised design of the left side engine cover.
2014-2015 Model: Left engine case, KTM part number: 90230002133 (BPCC-7331L fits)
2016 Model Left engine case, KTM part number: 93730002000 (BPCC-7331L does not fit)
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCC-7331L
SKU: ktm-10057 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Carbon, Duke 390 2012-16, KTM, RC 390, ShopCarbon airbox lid for race airbox, Aprilia RS250 Mk1/Mk2
€64.13
Carbon airbox lid for race airbox, Aprilia RS250 Mk1/Mk2
This airbox cover fits both Aprilia’s Mk1 and Mk2.
TYGA no: special030
SKU: apr-10098 Categories: ALL products, Aprilia, Bodykit replacement parts, High performance, High performance, RS250, ShopBracket front brake CNC silver 40mm Brembo, Yamaha R25/ R3
€51.61
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Yamaha R25/R3
CNC machined brake caliper support for your Yamaha R25/R3.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your R25/R3.
Tried and tested with the standard master cylinder and standard brake lines with great performance.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.