Set pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon cover, temp Gauge 64mm, Honda
€25.10
Carbon cover, temp Gauge 64mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0024
SKU: hon-10609 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Seat set (grp), CBR250 2011 –
€424.86
This bodywork set includes all the parts needed to convert the seat cowling for the 2011-13 CBR250R to TYGA GP style. Passenger seat cover, taillight, registration illuminating light and undertray and exhaust stay are all included as well as all fitting hardware.
TYGA no: BPFS-0107
SKU: hon-10191 Categories: ALL products, Bodywork, Bodywork and carbon, CBR250R 2011 - 15, Honda, ShopCarbon front fender stock shape, Honda MSX125 2021 –
€264.55
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCF-7048
SKU: msx-10476 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopRear shock holder, Honda VFR400 NC30
€18.50
Holder, Shock Reservoir, NC30
This stay mounts to the underside of the seat cowling sets BPFS-0148 and BPFS-0150. Supplied complete with clamps and mounting hardware.
Compatible Parts
TYGA seat cowling sets, BPFS-0148 and BPFS-0150
TYGA no: BPSY-0182
SKU: hon-10581 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30Upper fairing set street RC211V, CBR250RR MC22
€451.91
This set of bodywork comprises of the parts shown below which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock MC22. It fits to the original meter and mirror stays and uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Upper cowling RSW street, Honda NSR250 MC21/MC28
€219.65
Stylish replacement fairing based very closely on the GP250 RS250RW World championship winning race bike design. This upper cowling has been designed to be used on a street bike and uses a bright modern headlight unit with built in turn signals (BPLT-0011 ). This upper cowling is designed only to be used with our latest redesigned GP250 lower cowling BPFL-9014 combining for the ultimate in NSR250 race fairing design. We recommend this fairing to be used with TYLY-0001 GP upper stay and our GP mirrors TYMR-0001.
This cowling is supplied with a cowling meter stay extender to mount to the meterstay. This changes the position the fastener screws in to match the RSW upper cowling and to move it forward for a perfect fit.
Compatible Parts:
BPFL-9014 lower cowling
requires headlight BPLT-0011 and screen SCRE-0079, and SCRE-0080
TYGA no: BPFU-9012
SKU: hon-10239 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC21, NSR250 MC28, ShopHeadlights TYGA Aprilia fairing
€155.90
This sleek integrated double headlight unit uses OSRAM 35/35 Halogen bulbs and modern reflector and refractor technology . Comes complete with loom and is ready to plug in. This is suitable for the TYGA Performance fairing BPFU-9030
TYGA no: BPLT-0021
SKU: apr-10077 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, Shop