Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Lower Cowling (Carbon), NC35, GP-T, Assy.
€473.74
Lower Cowling (Carbon), NC35 GP-T, Assy.
This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0147
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC35, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9134.
Compatible products:
This product must be used with BPCU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPCL-9134
SKU: hon-10762 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Bolt, front brake rotor mounting, Honda
€2.38
Front brake mounting bolt. Bolt, M6 thread with a dome head and 6 mm. Allen key fitting
Replace those nasty corroded bolts with these Honda OEM shiny new ones, your bike deserves it! Suitable for most Honda models including:
CBR250R
MC18
MC21
MC22
MC28
NC23
NC30
NC35
RC30
RC40
RC45
etc.
TYGA no: 90106-KGH-600
SKU: hon-10500 Categories: ALL products, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Set, Exhaust Chamber, Side By Side Type, Stainless Steel, RGV250 VJ23
€1,010.86
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Rear sprocket aluminium gold, KTM RC390
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0114-39 -TYSR-0114-48
SKU: ktm-10018 - ktm-10023 Categories: ALL products, By product, CNC parts, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-, Sprockets, SprocketsSeat cowling (GRP), stock shape race, Honda VFR750 RC30
€386.36
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Top End Rebuild Kit MC18, Cyl. B, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘B’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002B
SKU: hon-10837 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Sidehanger right, RGV250 (Tyga)
€62.13
Replacement right hanger for your RGV250 VJ22 TYGA Step Kit. Complete with mounting bolts
TYGA no: STAH-0006
SKU: suz-10051 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, Suzuki