Undertray, Street, (Carbon), NC30/NC35 GP-T
€165.59
Undertray, Street, (Carbon), NC30/NC35 GP-T
This product is to be used with BPFT-9034 and BPCT-9034 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
TYGA no: BPCX-9034
SKU: hon-10765 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, RVF400RR NC35Carburettor Seal/Gasket Kit, MC21
€69.55
Carburettor Seal/Gasket Kit, MC21
Carburettor Seal/Gasket Kit, MC18, MC21
MC18/MC21 Carburettor Seal/Gasket kit.
1 Kit is for 1 Carburettor, so 2 kits needed for 1 bike
TYGA no: 16010-KM9-505
SKU: hon-11170 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Set pipe, Full race without silencer NEW, Kawasaki ZXR250 2013 –
€345.33
2013-2017, Set, Pipe, Full Race System, Ninja 250R, No Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with no silencer
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0050.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0077
SKU: kaw-10065 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Set powervalves ( 2 pieces), complete CNC billet aluminium, RG125
€230.58
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: special002
SKU: alg-10379 Categories: ALL products, High performance, RG125, Shop, Suzuki Tags: and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes., And the risk that a broken power valve will ruin your engine!!, Best available in the market., No more problems with the “power valve pin” and having to buy new ones every 15.000 km., The set is made of CNC billet aluminium and is special coated., This set of Power valves is the latest versionTyga Eyes IV Headlight, Assy.
€155.90
This sleek integrated double headlight unit uses OSRAM 35/35 halogen bulbs and modern reflector and refractor technology . Comes complete with loom and is ready to plug in. This is suitable for the TYGA Performance fairing BPFU-9028
Silencer carbon/carbon cap with carbon cover, Yamaha R25 / R3
€333.51
Set, Pipe, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with carbon sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0060
SKU: yam-10049 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Upper Cowling, Race, GRP, KTM RC390 WSS300
€170.63
Upper Cowling, Race, GRP, KTM RC390 WSS300
Replacement Upper Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCU-7331U (Carbon Unpolished)
BPCU-7331 (Carbon Clearcoated)
Big bore kit 300cc wiseco VHM, NSR250 MC18/MC21/MC28
€2,842.71
Big Bore Kit, NSR300, Wiseco, VHM *
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc heads and pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock, and also changable insert VHM cylinder heads, which have been specifically developed by TYGA and VHM for use with the TYGA 300cc Big Bore Kit.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-1007
SKU: hon-10391 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop