CDI Zeeltronic Suzuki RGV20 VJ22
€319.00
Reed valve Gasket silicone (set), Aprilia RS250/Suzuki RGV250
The OEM reed blocks and manifolds have a build in rubber ring, what after 20 years isn’t perfect anymore.
We offer a simple but effective solution, no risk on damaging the engine.
And can be used multiple times.
1 engine = 1 set
Front Fender red, Honda MSX125 GROM
€88.02
Front Fender, Valentine Red, MSX125 Grom
TYGA no: 61100-K26-900ZB
SKU: MSX-10098 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSilencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
€151.18
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
This high quality lightweight silencer is made from CNC machine entry and pressed stainless steel exit cap joined by a carbon/Kevlar fiber tube. It is designed very similar to the ones we make for the NSR500V but is a direct fitment for our 250V style chambers and provides the same power characteristics as our other two stroke silencers. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
"Note this product is intended to be used with our exhaust chambers (EXCS-0047) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber."
Compatible Products:
Tyga Performance Two Stroke chambers sets EXCS-0047. (We will be adding more to this list as we get the chance to install with other previous TYGA exhaust systems, Feel free to request advice by email about suitable applications) Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0083 carbon
TYGA no: EXSL-0084
SKU: hon-11047 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Lower Cowling (GRP), MC18, GP-T, Assy.
€183.50
Lower Cowling (GRP), MC18, GP-T, Assy.
This product is designed to be used with BPFU-9035 as part of the Bodywork set BPFS-xxxx
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9035.
This product is supplied with lower mounting stays on the left and right.
Compatible products:
This product must be used with BPFU-9035
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting.
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9035
SKU: hon-10728 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Mirror, Right Hand, Ninja 250R 2008 -12
€41.28
Mirror, Right Hand, Ninja 250R 2008 -12
TYGA no: 56001-0099
SKU: kaw-10233 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSet exhaust, race system double maggot , KTM RC390 2014 – 2016
€726.37
.Set, Pipe, Race System, RC390, Stainless Moto Maggot
Update your bike with this great TYGA performance, KTM power part!!
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied or compatible with a decibel killer for noise reduction and is very loud! Please be warned!
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with standard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0062
SKU: ktm-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopCarbon chain guard, KTM RC125/RC200/RC390 2022-
€141.35
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7131B
SKU: ktm-10207 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all models