Pro arm wheel spacer silver taper fit , Honda RC30 RC40 RC45 RS250 NX5
€24.56
Taper fit, rear Pro Arm rear wheel spacer. Machined from 7075 T6 aluminium. Light weight and attractive.
This spacer is a direct replacement for the rear wheel Pro Arm spacer on Honda Pro Arm models such as the RC30, RC40, RC45, RS250 NX5. Not suitable for the NC30, NC35, MC28 which uses a flat fitment on where it clamps to the wheel. (See TYLY-0096, TYLY-1096, TYLY-2096 and TYLY-3096)
TYGA no: TYLY-0196
SKU: hon-10526 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts, VFR750R RC30Stay, Comp, Upper Cowling, Ninja 250R/300R 2013 -18
€164.24
Stay, Comp, Upper Cowling, Ninja 250R/300R 2013 -18
TYGA no: 39137-0566-18R
SKU: kaw-10164 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopExhaust set stainless steel, Aprilia RS125
€355.59
.Set, Exhaust Chamber, Stainless Steel, Aprilia RS-125
Cone welded stainless steel exhaust, for your RS125 performance and look!
The TYGA Performance Aprilia RS-125 Stainless Steel chamber, when used with a TYGA silencer, offers huge saving in weight and increase in power over the stock system. The handcrafted cones are TIG welded together to show the weld rings to maximum affect; this system is a must for the Aprilia RS-125 owner and fits all versions up to and including 2011
This products is the chamber set only and to complete the full replacement exhaust system for your Aprilia RS125 you will need to order a silencer too.
Included in this product:
A.)1 X chamber set (EXCS-0013 or EXCS-0019). When you order this product, you will receive included in the chamber set:
1 X chamber
1 X manifolds with flange and ‘o’ring
2 X manifold to chamber springs
1 X clamp and mounting hardware
Not included in this product is the silencer. Please order separately:
B.)1 X silencer (EXSL-0003, EXSL-0004 OR EXSL-0005) of your choice. Each silencer is provided with mounting hardware and will have a badge attached on the correct side for this system when ordered at the same time.
As is the case with any power upgrade, it is important that you make adjustments to the carburation as necessary. The dyno graph shown had the jetting adjusted one size leaner on the main jet and one clip richer on the needle for optimum performance. However, you will need to adjust your bike’s settings according to your ambient condition. If in doubt, start with a rich setting across the range, and lean off as required. Failure to correctly set up the carburation could result in engine damage.
TYGA no: EXCS-0019Â
SKU: apr-10002 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, ShopKey holder CNC black, Aprilia RS250
€78.51
gnition Switch Holder, CNC Black, Aprilia RS250
This is a removable ignition switch holder for our Aprilia RS250 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1053.
TYGA no: TYLY-1153
SKU: apr-10013 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopCarbon tankshields set, Honda CBR600 2003-4
€211.27
These high quality carbon parts replace the cheap looking plastic original parts supplied by Honda
TYGA Performance aftermarket parts are of high quality and let your bike stand out from the crowd.
Hook for spring,
€1.22
This product is a stainless steel spring hook to be welded to existing pipework when used with our spring mounted silencers
Carbon exhaust chamber guard, KTM SX250/SX300
€160.51
Exhaust Chamber Guard (Carbon), KTM250/300 Off-road
This tough carbon exhaust guard is designed to fit snuggly over the stock KTM250/300 off-road models from 2005 to 2015. Constructed using high strength epoxy resins and with a layer of kevlar on the inside for extra protection, this guard is the best on the market.
Fits in minutes
Supplied with mounting hardware as shown in the photo
Vibe Rubber
€12.29
Vibe Rubber. Suitable for the following models:
BPFS-0012
BPFS-0013
BPFS-0014
BPFS-0019
BPFS-0020
BPFS-0030
BPFS-0032
BPFS-0033
BPFS-0090
BPFS-0092
BPFS-0115
BPFS-0116
BPFS-0119
See table for application of meter stay extensions with our body kits: