Exhaust stay GP-T, Honda RVF400 NC35
€71.27
This exhaust stay is designed to be used with our GP-T kit for the NC35 and attaches to subframe TYLY-0133. Note for NC30, use TYLY-0174
TYGA no: TYLY-0175
SKU: hon-10592 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Silencer aluminium round 43mm, Kawasaki ZXR250 2008 –
€216.12
Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0033
SKU: kaw-10021 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersFairing set street T8, CBR250RR MC22
€1,247.92
This set of bodywork comprises all the bodywork parts including the passenger seat cover By ordering in one set you save money on the parts as well as save on shipping costs if you made the order in two or more separate shipments.
Please note parts are supplied unpainted and in white primer.
Carbon rear hugger, KTM RC125/RC200/RC390 2022-
€113.63
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCH-7031B
SKU: ktm-10206 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsLower Cowling, Race, Carbon Clearcoated, KTM RC390 WSS300
€477.30
Lower Cowling, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFL-7531 (GRP)
BPCL-7531U (Carbon Unpolished)
kit seat set race complete set, Ninja 400
€280.92
Kit, Seat Set, (Race GRP) Ninja 400
Complete Race Seat Set
Consist of Seat Cowling BPFT-7040(p) and Undertray BPFX-7040
See also complete Fairing Set BPFS-0175
TYGA no: BPFS-0176
SKU: kaw-10135 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Fairing set race GP-T, Honda VFR400 NC35
€751.18
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0164
SKU: hon-10632 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Shroud right Blue, Honda MSX125 GROM
€32.45
Shroud, R, Blu
TYGA no: 83480-K26-900ZE
SKU: MSX-10224 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop