Front fender RC211V, NC35
€71.75
Attaches to the original NC35 RVF400 mounting points and can be used with all Tyga and Honda bodywork
Compatible Parts:
All Tyga Performance and Honda OEM panel
TYGA no: BPFF-9005
SKU: hon-10124 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopBelly pan (GRP) RED, Honda MSX125 GROM
€225.09 €158.00
Belly Pan, (GRP), MSX125, painted valentine red to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPCL-7228 shown in photos of belly pan fitted to bike.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPFL-7128 R
SKU: MSX-10187 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopStainless silencer 380mm
€231.41
Silencer, Stainless, Round, Four Stroke, 50.8mm., Assy
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
TYGA no: EXSL-0064
SKU: kaw-10066 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersRacing step kit CNC silver, Honda RS250 NX5
€271.50
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium and is supplied complete with super stiff carbon heel guards.
Direct replacement for standard parts, this step kit retains standard position. Pitch of hanger to frame mounting holes is 78.4 mm.
TYGA no: STAA-0022
SKU: hon-10511 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopChain slider, RS250 NX5
€44.99
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon under tank covers, Honda MSX125SF
€94.45
Carbon under tank covers, Honda MSX125SF
Fits over nasty plastic stock items and transforms the appearance of your bike.
Install with double sided tape provided or with silicone sealant for a really permanent installation
TYGA no: BPCC-7428
SKU: msx-10389 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopUpper cowling street stock shape, Honda CBR250 MC22
€143.46
This product is part of set BPFX-9225, (the other part being BPFX-9225F). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.
Carbon fairing stay side 87mm (pair), universal
€82.47
Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.
Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and ‘R’ clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0144
SKU: hon-10537 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, Shop