Top triple clamp silver set, CBR250 2011 –
€280.14
CNC machined top triple clamp with detachable ignition switch/lock holder for your CBR250R and CBR300R. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and ignition switch/lock holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0069
SKU: hon-10189 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopUpper cowling set GRP endurance , Honda VFR400 NC30
€434.45
Upper Cowling Set, Endurance, (GRP) NC30
This Suzuka 8 Hour inspired cowling is supplied with four headlight covers, two unpainted ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC30 headlight and mounts to the bike using the mounting hardware provided (Upper stay and front mounting bolt and spacer bush. All the other parts mount the same way as stock including meter stay, mirrors, indicators etc. We recommend that this be used with the TYGA lower cowling BPFL-0003, or it can be used with stock Honda NC30 lower and inner cowling too.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0152
SKU: hon-10639 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Bracket front brake CNC black 84mm Brembo, Honda MSX125 GROM
€33.06
Bracket, Front Brake, 84mm Brembo Conversion, Black, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0098)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Only suitable for the non ABS models
TYGA no: TYLY-1098
SKU: MSX-10126 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon under cowling belly exhaust , Honda 1st + 2nd gen.
€289.52
Under Cowl, Belly Exhaust Type, (Carbon), MSX125 Monkey
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPCL-7328
SKU: MSX-10354 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon front fender, Honda CBR600 2003-4
€209.57
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting.
TYGA Performance aftermarket parts are of high quality and let your bike stand out from the crowd.
Seat cowling right VJ21, Suzuki RGV250 VJ21
€39.40
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021H and L. for installation.
TYGA no: BPFT-9021R
SKU: suz-10103 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Carbon cover, temp Gauge 64mm, Honda
€25.10
Carbon cover, temp Gauge 64mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0024
SKU: hon-10609 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Powervalve cover black, RGV250 / RS250
€120.45
These 6061 T6 aluminium TYGA exhaust valve covers offer a great engine cosmetic enhancement, and also serve the function of keeping your valve chamber area free from exhaust goo.
The residue oil is allowed to blow off into separate catch tanks.
Sealing of the cover to the cylinder is taken care of by a CNC machined groove fitted with an O-ring, so no more broken gaskets. Secured in place with smart looking button head M5 stainless steel socket bolts.
This kit includes the following parts:
2x Covers
2x O-rings (fitted)
8x M5 Button head bolts
2x Hose
1x Catch bottle
Cable ties
TYGA Performance aftermarket parts are of high quality and let your bike stand out from the crowd.
TYGA no: TYLY-2039
SKU: alg-10019 Categories: ALL products, Aprilia, CNC parts, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various parts, Various parts, Various parts