Kit, Bodywork, GRP, stock shape, NSR250 MC21, Painted Rothmans
€1,604.24
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Please note this product is only available for delivery in 7 days
TYGA no: BPFS-0205
SKU: hon-11280 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersBracket, Right Footrest, Ninja 250R 2008 -12
€70.62
Bracket, Right Footrest, Ninja 250R 2008 -12
TYGA no: 35063-0386-18R
SKU: kaw-10211 Categories: ALL products, Kawasaki, Ninja 250R 2008- 12, ShopExhaustset race Stainless steel motogp Silencer open, NC30 NC35
€1,035.91
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0013.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0011
SKU: hon-10101 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Top Triple clamp CNC black , Aprilia RS250 kit
€209.92
CNC machined top triple clamp for your Aprilia RS250.
Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0153)
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and looks fantastic!
Only fits the MK2 RS250
TYGA no: TYLY-1053p
SKU: apr-10018 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopSet, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, 3rd Gen, 90-93
€1,338.49
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0154
SKU: hon-11326 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon tank protector, Suzuki RGV250 Vj21
€180.64
Carbon Tank Protector, Suzuki RGV250 VJ21
This real carbon protector is designed to fit snuggly on the RGV250 VJ21 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-9037
SKU: suz-10143 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsFork cap kit, Suzuki RGV250 Vj22
€317.71
After 20 years or so of hard use, many RGV’s damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any RGV250 VJ22 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
TYGA no: TPER-0069
SKU: suz-10129 Categories: ALL products, CNC parts, Honda, RGV250 VJ22, Suzuki, Suzuki RGV250, Various partsTyre warmers (set) light weight sports
€321.00 €288.21
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These warmers are designed for 250cc, 400cc and Supermoto motorcycles, running the usual 110~120 front tyre, and 150~165 rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0005Â
SKU: alg-10143 Categories: ALL products, Aprilia, Honda, KTM, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, RVF400RR NC35, Shop, Suzuki, Tyre warmers, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZF-R25/R3