Piston Circlip 15mm, MC16~28
€1.05
Piston Circlip 15mm, MC16~28
TYGA no: 94601-15000
SKU: hon-11096 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Screen clear stock shape, Honda VFR750 RC30
€52.00
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Front wheel spacer kit aluminium, Suzuki RGV250
€33.23
Replace the heavy steel front wheel spacer and wheel bearing distance spacer on the VJ22 with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0053
SKU: suz-10084 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiBracket ohlins rear shock, Honda NSR250 MC21/MC28
€27.34
Bracket, Rear Shock, Ohlins Conversion, MC21/MC28.
Consists of a bracket with foam to protect the reservoir, two hose clamps, and and two genuine Honda M6 bolts. This replaces the Honda part 52411-KV3-000. and recommended to be used with Ohlins rear shock part number HO110013 or similar to give full support for the shock reservoir. Note this can be used on the R, SE and SP spec models.
TYGA no: BPSY-0135
SKU: hon-10488 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsSeat Cowling, Top, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
€180.64
Seat Cowling, Top, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0141. Please note that the following parts are required to complete the set:
BPFT-7331A Seat Cowling, Top
BPFT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPFT-7331A
SKU: ktm-10112 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Top End Rebuild Kit MC18, Cyl. B, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘B’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002B
SKU: hon-10837 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Seat Cowling (GRP) MC18, Stock Shape, Street
€263.33
Seat Cowling (GRP), NSR250 MC28, Stock Shape, Street.
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape
TYGA no: BPFT-0022
SKU: hon-10911 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopSteering stopper, KTM RC390
€19.17
Steering Stopper, KTM RC390
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from ‘tank slappers’. Installs in minutes. No special tools or dismantling of the bike required.
Fitting Instructions: BPSY-0159 Steering Stopper, KTM RC390
1) Remove 2x M3 bolts and spring washers, and remove the top plate
2) Remove cover from 3M double sided tape
3) Lift the steering stopper into position to wrap around the standard
steering stopper on the frame. It should hold itself in place with the tape
4) Refit cover, M3 screws and washers and tighten the screws securely.
5) Go racing!!
TYGA no: BPSY-0159
SKU: ktm-10052 Categories: ALL products, KTM, RC 390, Shop, Universal parts, Various parts