Bar end weights red , Honda MSX125 GROM
€28.53
Handlebar End Weight, Red, Pair, MSX125 Grom
TYGA no: APK20A53102TA
SKU: MSX-10104 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsSilencer clamp single 60mm
€11.78
This single silencer clamp is specifically designed for TYGA expansion chambers for the Honda NSR150 and Aprilia RS125
Designed to securely clamp 60~61mm O.D. silencers.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0007
EXCS-0013
EXCS-0019
EXCS-0037
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0010
SKU: alg-10001 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, NSR125 JC22 1994 - 2003, NSR150SP, RS125, ShopCarbon end cap YZ250 silencer
€37.18
Tail Pipe, Stainless Steel, YZ250.
This link pipe is used in conjunction with the silencer, and is specific to the Yamaha YZ250
This product is compatible with EXCB-0032 and EXSL-0050 which together make up complete exhaust system EXTS-0001
TYGA no: EXCC-0007
SKU: alg-10142 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Motocross, Shop, Yamaha, YZ250 2005-15Kitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
€55.41
Kitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
Must be used with Kitaco I-Map 763-1432010 (MSX-10309)
TYGA no: 763-1432581
SKU: msx-10470 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopLicense plate holder (Tyga), Aprilia RS250
€51.57
This product holds the registration/license plate for use with our Aprilia RS-250 GP style seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using carbon, see BPCX-9130
TYGA no: BPFX-9130
SKU: apr-10073 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopLower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the VFR400R/NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1944 Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC30.
Lower Cowling, GRP, NC30, Stock Shape, Painted Type 1
€441.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFL-0003Btype1
SKU: hon-11410 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Gear 5th drive z=24 no.4, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl