Tube, Carbon, Round, 83mm x 350mm
€106.11
made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Fairing set street GP2010, Honda NSR250 MC21/MC28
€510.74
This set of bodywork comprises of the parts showing in the picture which are also available separately.
This fairing has excellent aerodynamics for racing or road use.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
* A clear screen is provided unless you specify tinted in the comment box at check out.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0094Â
SKU: hon-10221 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon dash TYGA,, Aprilia RS250
€33.12
This carbon dash is made specifically for the TYGA bodywork kits (BPFS-0100 and BPFS-0101). Adds finishing touch to the fairing and hides wiring harness
Not suitable for the stock bodywork, see BPCX-9330.
TYGA no: BPCX-9230
SKU: apr-10074 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopCarbon Lower cowling, stock shape, NXA RS250R (2001- ’08)
€524.11
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Clutch Plate B, MC28R
€13.95
Clutch Plate B, MC28R
TYGA no: 22201-MS6-620
SKU: hon-11158 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Oil Cooler Stay, RC36-2, RC30 Style
€7.56
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSY-0375
SKU: hon-11494 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon generator/sprocket cover, Honda NSR250 MC18/MC21/MC28
€220.36
Generator/Front Sprocket Cover NSR250
This lightweight carbon component will make your engine look like it belongs in the GP paddock!Complete with all mounting holes to install speedometer drive and cable guide for side stand switch.
Important, this products re-uses the stock engine case guard from the plastic cover.
TYGA no: BPCC-9106
SKU: hon-10471 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopBelly Pan, (GRP) RD250/350LC (4LO)
€181.29
Belly Pan, (GRP) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from high strength epoxy resin and 200 gram glass fabric, making it flexible and light and attractive both on the inside and out. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is supplied primed, however, will require minor preparation, before it’s ready for paint.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this GRP (Glass reinforced plastic) version, we also supply a carbon version, BPCL-7032