Inner cowling GRP stock “painted Red” , NSR250 MC21/MC28
€156.17
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFC-0040RED
SKU: hon-11362 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shopfairing set street RC211V, NC30 kit
€902.65
Fairing set street RC211V, NC30 kit
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank.
This set of bodywork requires extensive modification of the NC30 including a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights. It also includes a steering stopper to limit steering movement.
Comprises the parts shown in the picture which are also available separately:
*A clear screen is provided.
*A headlight with NO turn signals is provided unless you specify with turn signals.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0032
SKU: hon-10065 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Seat set street, Honda NSR250 MC28
€608.81
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0045Â
SKU: hon-10243 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, By product, Honda, NSR250 MC28, ShopSeat Cowling ( GRP) MC18, Stock Shape, Single Seat, Taillight Holes
€263.33
Seat Cowling (GRP), NSR250 MC18, Stock Shape, Single Seat, Taillight Holes
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape.
TYGA no: BPFT-0122
SKU: hon-10912 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopCarbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopSet pipe full system with maggot silencer, Honda Monkey 125 2018-
€442.31
Set, Pipe, Full Race System, Monkey 125, Moto Maggot This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted Moto Maggot silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).</br>
Note that this exhaust system is supplied with mounting hardware so the original Honda exhaust guard can be installed with the TYGA Maggot system. However, this guard is not necessary and the exhaust system can be installed without the guard, as the pipework is not likely to contact the rider in normal operation.
All fitting hardware included.
</br>
<strong>Instructions</strong>
<a href= /media/wysiwyg/MSX-10449-fitman-exms0017.pdf target= blank >Download Instructions here</a>
</br>
<strong>Performance and Dynograph</strong>
The blue trace shows the 100% standard Honda Monkey, compared to the red trace, which is after installing the TYGA Full System set, Monkey 125, Moto Maggot. A useful gain all through the range, increasing as the revs rise up to maximum.
</br>
<strong>Please also see:</strong></br>
<a href= /index.php/set-pipe-full-system-with-carbon-oval-silencer-honda-monkey-125-2018.html >MSX-10451 Carbon Oval High level System, Monkey 125</a>
<a href= https://www.tygaeurope.com/index.php/set-pipe-full-system-no-silencer-honda-monkey-125-2098.html >MSX-10450 Stainless Oval High level System, Monkey 125</a>
Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250
€59.00
Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250 (alg-10098)
TYGA no: P400510850255
SKU: alg-10098 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiCarbon under tank covers replacement type , Honda MSX125 GROM
€166.11
Under-Tank Covers, Pair (Carbon), Replacement Type, MSX125
Carbon under-tank covers for MSX125 Grom. Replaces the nasty plastic stock items and transforms the appearance of your bike. Installs exactly the same way as the plastic ones.
See also BPCC-7228 for alternative glue-on type.
TYGA no: BPCX-7628
SKU: MSX-10327 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop