Sprocket holder CNC black, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-0043
SKU: hon-10393 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopSilencer aluminium Classic “SHORTY’ 60mm, 2 stroke black endcap
€76.12
Silencer, Shorty, Aluminium Classic, Two Stroke, Assy.
This shorty aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0001 Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0002B
SKU: alg-10370 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopClutch steel plate A, Honda NSR250 MC21/MC28
€36.51
Clutch Steel Plate A, MC28 SE/SP
TYGA no: 22321-KV3-780Â
SKU: hon-10576 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, NSR250 MC28Bearing Headstock Upper
€47.34
Bearing Headstock Upper
TYGA no: 91015-KT8-005
SKU: hon-11121 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Steering stopper MiniRacerXtreme, Honda MSX125 GROM
€17.45
Steering Stopper, MSX125 Grom
This steering stopper is designed specifically for our MRX project to limit steering movement to the confines of the body kit. However, this can be used separately with the standard set up for anyone wanting to limit steering movement. Easy to install and fits in minutes.
Fitting Instructions:
Remove the front brake stay and the horn wiring stay from the lower triple clamp temporarily. Install the steering stopper as shown in the photo Reinstall the stays in the standard position holding the steering stopper in place. Test to make sure the steering operates smoothly and no wires, cables or hoses are getting pinched or rubbing on anything they shouldn’t do.
TYGA no: BPSY-0122
SKU: MSX-10270 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon rear hugger,Honda CBR250 2011 – CBR300 2014
€236.91
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as reduce unsprung weight.
TYGA no: BPCH-7208
SKU: hon-10183 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CBR250R 2011 - 15, CBR300R 2014-, Honda, ShopPainted Kit complete bodywork stock RT, “twin” Honda RVF400 NC35
€1,831.75
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFS-0212
SKU: hon-11394 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35Carbon lower fairing stay, Szuki RGV250 Vj21
€70.24
Fairing Side Stay, Carbon, Set, RGV250 VJ21
These lower fairing stays are direct replacements for the Suzuki OE part numbers 94740-12C0-000 and 94750-12C0-000 on the VJ21 RGV250
Note: left and right are same in our set because the OEM ones are the same except the nut is on the outside (between fairing and stay) on the right side but on the back side on the left side.
So we supply one bush for left side to represent the thickness of the nut that is welded on the stay. On the right, it doesn’t need a bush.
TYGA no: BPCC-0059
SKU: suz-10137 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various parts