Silencer stainless steel round 86mm (4 stroke) 38,1mm
€259.22
This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
TYGA no: exsl-0019
SKU: alg-10111 Categories: 4 stroke exhaust sets, ALL products, By model, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, Exhausts, Honda, Shop, SilencersHandlebar set silver, Honda CBR250 2011 – CBR300 2014
€222.93
Handlebar Set, Black, CBR250R/CBR300R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well with our step kit STAA-0013 putting more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Designed to match our triple clamp (TYLY-0069 and TYLY-1069), these handlebars give the finishing touch to the cockpit area and are available in two colours, black or silver.
TYGA no: TYLY-0469
SKU: hon-10185 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopLower cowling, Aprilia RS250 Tyga, assy
€234.42
This lower cowling is suitable for our Aprilia RS-250 kits, BPFS-0100 and BPFS-0101.
This product is compatible with upper cowling BPFU-9030 and BPFU-9130. Will not fit stock Aprilia upper cowling
TYGA no: BPFL-9030Â
SKU: apr-10044 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopExhaustset race Stainless steel carbon Silencer round w cap, NC30 NC35
€1,251.76
TYGA stainless steel racing exhaust, the best set available in the market
Exhaustset race Stainless steel, carbon silencers oval w cap, NC30 NC35 (hon-10302)
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round carbon silencer EXSL-0112 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0026
SKU: hon-10303 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Frame In-fill panels (pair) GRP, RC36-2 RC30 style
€177.69
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFC-7049
SKU: hon-11461 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon tank shrouds with duct and grill, Honda MSX125 GROM
€172.49
Tank Shrouds, With Duct and Grille, (Pair), (Carbon), MSX125 Grom. Looks cool and makes your bike stand out from the crowd.
TYGA no: BPCX-7828
SKU: MSX-10179 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopLower cowling stock shape left, CBR250RR MC22
€108.39
Exact copy of left side of stock MC22 shape lower to be used either with stock shape or Tyga RC211V style bodywork
Screen OEM, Ninja 250R
€88.37
Screen OEM, Ninja 250R
TYGA no: 39154-0028
SKU: kaw-10235 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop