Tank shrouds (grp) yellow with duct and grill, Honda MSX125 GROM
€147.50 €104.00
ank Shrouds, With Duct and Grille, (Pair), (GRP), MSX125 Grom. Y-217 Queen Bee Yellow Painted to match your bike. Looks cool and makes your bike stand out from the crowd.
Pictures of bike show carbon version of this product (BPCX-7828) installed.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFX-7828 YM, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
TYGA no: BPFX-7828 Y
SKU: MSX-10218 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopGear 3rd driven z=21 no.15, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Carbon fuel tank, Honda NSR250 MC28
€1,444.49
Fuel Tank, Carbon, NSR250, MC28
Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0003
BPFS-0004
BPFS-0032
BPFS-0059
BPFS-0060
BPFS-0129
BPFS-0130
BPFS-0131
TYGA no: BPCG-0001
SKU: hon-10682 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopHandle bar clamp, Right, black, 41mm, Ninja 400
€90.76
Handlebar Clamp, Right, Black, 41mm, Ninja 400
Replacement Right handlebar clamp for handlebar set TYLY-1212
Undertray seat, Ninja 400
€60.24
Undertray, Seat, (GRP) Ninja 400
Replacement undertray for TYGA Seat Cowling BPFT-7040(p)
TYGA no: BPFX-7040
SKU: kaw-10136 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Exhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Sub-frame (TYGA), Suzuki RGV250 VJ22
€143.58
This subframe is a replacement for the stock Suzuki item and to be used in our TYGA seat cowling kits BPFS-0036, BPFS-0037, BPFS-0038 etc. and bolts up to the VJ22 frame without need for modifying any components. It will not fit the stock Suzuki seat cowling.
The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is much smaller than the stock one and weighs much less without compromising strength.
Not to be used on a motorcycle carrying a passenger and rider.
This subframe is only compatible with the TYGA rear seat, the original seat cowling won’t fit.
TYGA no: TYLY-0028Â
SKU: suz-10089 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki, Universal partsExhaust Chamber, Right, Side By Side Type, Stainless Steel, Aprilia RS-250
€281.46
Bare replacement right side chamber for EXCS-0007