Carbon tank protector, Kawasaki Ninja 250/300 2013-18
€104.89
Carbon direct replacement for OEM Kawasaki item. Pre drilled for easy fitting. Compatible with:
2013- Ninja 250
2013- Z250
2013- Ninja 300
2013- Z300
TYGA no: BPCC-7032Â
SKU: kaw-10238 Categories: ALL products, Carbon, Kawasaki, Ninja 250R/300R 2013 -, ShopTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit NSR250 MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3300
SKU: hon-11269 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsCarbon fuel tank, Honda NSR250 MC21
€1,444.49
Fuel Tank, Carbon, NSR250, MC21
Top quality reproduction of the steel MC21 fuel tank in carbon fiber. This product is a direct replacement for the stock MC21 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0004
SKU: hon-11194 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopCarbon seat set, Honda VTR1000 SP1/SP2
€838.70
This set comprises the TYGA carbon seat cowling and luggage compartment lid. Made to the same dimensions as the original Honda item, this product is easy to fit and will enhance your bike’s looks as well as be stronger and lighter than the parts they replace.
Beautiful, perfect fitment and gives your bike that HRC look.
Disc Brake, Front, Ninja 250R/300R 2013 -18
€302.52
Disc Brake, Front, Ninja 250R/300R 2013 -18
TYGA no: 41080-0578-11H
SKU: kaw-10181 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopPassenger seat cover RC211V, CBR250RR MC22
€49.69
This stylish seat cover replaces the passenger seat pad on the MC22. Simply unbolt the original and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9025 only. Not for use with stock seat cowling.
Harness Extension, SC28 (94-95) Meter, Honda VFR750R RC36-2
€28.51
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYWH-0008
SKU: hon-11478 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistTriple clamp set CNC black 88/89 , Honda NSR250
€673.59
Triple Clamp Set, CNC Black, NSR250, MC18, 1988/89
CNC machined TYGA triple clamp set for your NSR250 MC18 (1988/1889)
These stylish, all aluminium triple clamps are a direct replacement for the MC18 triple clamps, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1270
SKU: hon-10701 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all models