Pillion seat cover “GRP”, KTM RC390 2022 –
€81.19
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731
SKU: ktm-10211 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsSet exhaust, half race with silencer, Kawasaki ER6
€392.82
The TYGA ER6 Race System has been designed with maximum power mind. No compromises have been made in the design and production of this exhaust. Manufactured from hand welded TIG welded stainless steel sections throughout, with the infamous Maggot ‘silencer’ secured by springs, for that ‘factory’ look and feel. The system fits both the ER6-N and the ER6-F. System is supplied with a lug for oxygen sensor.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only 1.5 kg, (compared to over 6 kg for stock) you are shaving valuable kgs off your bike.
The pipe set is supplied with Maggot silencer EXSL-2013 which is held in place by springs for ease of fitment and removal. This system WILL not comply to specific country noise emission regulations and is not homologated for street use. We strongly recommend the wearing of ear plugs when riding a motorcycle with this system installed. You have been warned!!
TYGA no: EXPS-0023
SKU: kaw-10012 Categories: 4 stroke exhaust sets, ALL products, ER6N-F 2009-11, Exhausts, Kawasaki, ShopDecal, Tail Cowl Cover 250R Silver, Ninja 250R 2008 -12
€2.29
Decal, Tail Cowl Cover 250R Silver, Ninja 250R 2008 -12
TYGA no: 56054-0132
SKU: kaw-10192 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopHandlebar set 50 mm, silver
€230.31
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 50mm. inverted front suspension. See application chart below.
7 degree angle for a comfortable, yet sporty feel.
Ducati 750/900SS
Ducati Monster, Pre 2010
Honda CBR1000RR 2004
Honda CBR929/954
Honda RC45
Honda RC51 2000-05
Honda RS250 NF5/NX5 USD
Honda RVF400 NC35
Kawasaki ZX10R 2004
Kawasaki ZX14R All
Kawasaki ZX6/RR/636 2003
Suzuki GSXR1000 2001
Suzuki GSXR1100 95-98
Suzuki GSXR1300 All
Suzuki GSXR600 2004
Suzuki GSXR600 92-93
Suzuki GSXR600 94-96
Suzuki GSXR750 1993
Suzuki RGV250 VJ22/23
Suzuki TL1000R
Suzuki TL1000S
Yamaha R1 1998
Yamaha R6 2005
Yamaha YZF750 94-97
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-0078
SKU: alg-10090 Categories: ALL products, Aprilia, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR600RR 2007- 16, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, ZX10R 2011 -15Aluminium wheel spacer kit “silver” , KTM Duke – RC125/RC200/RC390
€52.47
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TPER-1003
SKU: ktm-10186 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsVHM cylinder head (2 pieces), Honda NSR250 MC21/MC28
€604.90 €544.41
VHM cylinder head (2 pieces), Honda NSR250 (alg-10096)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder heads for use on the NSR250
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.60cc)
These heads use a centrally located spark plug and coolant outlet spigot just like the standard NSR rear cylinder. Therefore an HRC style hose is required which must also be ordered.
1x HRC style coolant hose for front head (not shown) part no. alg-10102
TYGA no: AA33054
SKU: alg-10096 Categories: ALL products, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, VHM productsBum stop, RC30 style replacement
€74.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSP-0012
SKU: hon-11470 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon frameshields (pair), Suzuki GSX 1000 K5-K6
€282.92
Frame shields
Direct replacement of the original Suzuki part
Let your bike stand out from the crowd with this beautiful carbon fibre product.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.