Brembo Gold 84mm cast Caliper
€156.80 €139.28
Brembo Gold 84mm cast Caliper
These calipers are used on many European bikes, easy to install and give good quality for money.
Together with our TYGA bracket conversion it will update your bike to todays standard.
34mm pistons, bleed screw and banjo are reversible.
Order with trust.
TYGA no: 20.6951.46
SKU: alg-10253 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various partsSeat set street GRP GP-T, Honda RVF400 NC35
€1,078.75
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0149
SKU: hon-10582 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Seal, Crank Right, MC28
€39.58
Seal, Crank Right, MC28
TYGA no: 91203-KV3-681
SKU: hon-11113 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR Forks to fit MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3310
SKU: hon-11245 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersChain Adjuster/Rear Stand Bobbin (one side only). CBR500
€118.24
This is a replacement part for TYLY-0092. This is not a complete set but just one side. (Does not include bobbin shown in photo).
Step, R. Fr., MC28
€77.04
Step, R. Fr., MC28
TYGA no: 50660-KV3-700
SKU: hon-11144 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Side Cowling, Left, Race, Carbon Unpolished, KTM RC390 WSS300
€379.14
Side Cowling, Left, Race, Carbon Unpolished, KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331L (GRP)
BPCU-7331L (Carbon Clearcoated)
TYGA no: BPCU-7331UL
SKU: ktm-10162 Categories: ALL products, Bodywork, KTM, RC 390, WSS300 bodyworkRacing stepkit black/RED adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Black, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-1027RED
SKU: msx-10417 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, Shop