Fairing set street GP-T, Honda RVF400 NC35
€1,082.81
The ultimate faring set for your Honda RVF400 NC35!!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0145 which is made using GRP (glass reinforced plastic) primed and ready for paint**, we also offer a similar product which is made using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0147
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0145
SKU: hon-10584 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Top Triple clamp CNC silver, NC30
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your VFR400 NC30.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race us
TYGA no: TYLY-0044
SKU: hon-10113 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Carbon trim stock shape, Dax
€38.15
Trim, Carbon, stock shape, Honda Dax
TYGA no: BPCX-7137
SKU: MKY-009 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopPassenger seat cover red/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R/F
SKU: MSX-10149 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopSilencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom
€313.65
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom, no fittings
See also similar product EXSL-0059 (silencer, short type).
Clampingplate ram airbox, Honda RS250 NX5
€10.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221A
SKU: hon-11381 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsCarbon front fender, Kawasakit ZXR250/300 2013-
€187.52
Carbon direct replacement for OEM Kawasaki item. Pre drilled for easy fitting. Compatible with:
2013- Ninja 250
2013- Z250
2013- Ninja 300
2013- Z300
TYGA no: BPCF-7032Â
SKU: kaw-10033 Categories: ALL products, Carbon, Kawasaki, Ninja 250R/300R 2013 -, ShopSeal, Headstock Lower
€25.62
Seal, Headstock Lower
TYGA no: 53214-371-010
SKU: hon-11142 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28