Front sprocket 13T, Honda MSX125 GROM
€7.37
13T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: 23801-KPH-900
SKU: MSX-10084 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsFork gear shift no.2, RGV250/RS250
€82.24
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Passenger seat cover yellow/flad black, Honda MSX125 GROM
€187.90 €132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in Y-217 Queen Bee Yellow with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFX-7128 YM/F, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 Y/F
SKU: MSX-10153 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopLower Triple Clamp, CNC Black, Honda VFR400R/NC30
€364.10
Lower Triple Clamp, CNC Black, Honda VFR400R NC30
CNC machined TYGA lower triple clamp for your NC30.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings.
This product is also sold as part of a set TYLY-1244, Triple Clamp Set, CNC Black, NC30.
Carbon cover, temp Gauge 55,5mm, Honda
€25.10
Carbon cover, temp Gauge 55,5mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC35 RVF400
SC28 CBR900RR
TYGA no: BPCC-0026
SKU: hon-10610 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsSet pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopWater Hose C, MC28
€12.31
Water Hose C, MC28
TYGA no: 19513-KV3-770
SKU: hon-11161 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28RC Valve Cable B, NSR150SP
€11.81
RC Valve Cable B, NSR150SP
TYGA no: 14340-KW6-840
SKU: hon-11171 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SP