Section, Pipe, Underbelly, Full Race System, MSX125 Grom
€150.88
Section, Pipe, Underbelly, Full Race System, MSX125 Grom
Suitable for our exhaust systems EXPS-0064 and EXPS-0068
Kit, Fairing set (street) Stock shape 1989 Honda NSR250 MC18
€441.91
Kit, Fairing Set (Street), Stock Shape, 1989, NSR250 MC18
Consist of BPFU-9122 Upper Fairing,
BPFL-9122 Lower Fairing and a clear screen
TYGA no: BPFS-0173
SKU: hon-10920 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopExhaustset race Stainless steel Silencer aluminium round , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round aluminium silencer EXSL-0047 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0053
SKU: hon-10358 Categories: 4 stroke exhaust sets, ALL products, By model, By product, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Lower Cowling (Carbon), NC35, T13, Assy.
€566.16
This lower cowling is part of a set of bodywork BPFS-0116.
TYGA no: BPCL-9218
SKU: hon-10806 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Carbon clutch cover, Yamaha R6 2006-12
€132.87
Carbon clutch cover
TYGA no: BPCC-7209
SKU: yam-10017 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Tyga Step Kit Replacement Link Rod, Female, 215 mm.
€13.99
Tyga Step Kit Replacement Link Rod, Female, 215 mm.
Uses M6x1 female thread in one end and M6x1 L/H female thread in the other. 215mm in length.
Seat set with carbon street, Honda NSR250 MC21
€714.98
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts shown below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0003
SKU: hon-10225 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopBracket front brake CNC silver 84mm Brembo, Kawasaki Ninja 400
€48.00
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Kawasaki Ninja 400
CNC machined brake caliper support for your Kawasaki Ninja 400.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your Ninja 400.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Torque Setting: 35Nm
TYGA no: TYLY-0210
SKU: kaw-10155 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-