Pillion seat cover “Black”, KTM RC390 2022 –
€122.50
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731black
SKU: ktm-10210 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon set, Yamaha R1 2009-14
€458.68
Carbon set, Yamaha R1 2009-10
A set contains:
Front fender
Rear Hugger
Chain guard
Direct replacement for original Yamaha part
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-0089
SKU: yam-10001 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14Brake reservoir cap front silver , Honda MSX125 GROM
€24.38
Brake Reservoir Cap, Front, CNC, Grey, genuine Honda part.
TYGA no: APK2645513TA
SKU: MSX-10036 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsSeal, Crank Centre, MC28
€4.41
Seal, Crank Centre, MC28
TYGA no: 91301-KV3-771
SKU: hon-11105 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon swing arm covers left, Suzuki RGV250 VJ22
€153.76
Clutch Cover, Carbon, RGV250 VJ21/VJ22
Carbon cover to replace the plastic stock one on the Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-9020L
SKU: suz-10221 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSeat Cowling (GRP), NX5 RS250R (early model style)
€290.93
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Please see our range of NX5 bodywork section for sets that use this product and similar items.
TYGA no: BPFT-9236
SKU: hon-10941 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopLower Triple Clamp, CNC Black, CBR600RR Forks/NSR MC18, Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR, MC18 Shaft
CNC machined TYGA lower triple clamp for the NSR250 MC18 to take 53 mm diameter CBR600RR forks.
For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set
TYLY-1245 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC18.
TYGA no: TYLY-1345
SKU: hon-10713 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18Fairing set street, Suzuki RGV 250
€509.72
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all the additional fasteners needed to mount it to a stock VJ22.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0040
SKU: suz-10012 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, Suzuki