Cowling left red, Honda MSX125 GROM
€23.09
Cowling left red, OEM Honda part
TYGA no: 77225-K26-900ZDÂ
SKU: MSX-10289 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon airducts (pair) gloss , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110
SKU: hon-11462 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersShroud inner right, Honda MSX125 GROM
€6.86
Shroud inner right OEM Honda part
TYGA no: 83560-K26-900
SKU: MSX-10024 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon front fender sport, universal
€257.47
Front fender stock shape, Honda RS250 NX4-NX5
Same shape as original
Compatible Parts:
All Tyga Performance and Honda OEM panels.
Passenger seat cover primer, Honda MSX125 GROM
€137.59
moet nog 502
TYGA no: BPFX-7128
SKU: MSX-10329 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopPassenger Seat Cover GRP, NC30, Stock Shape, Assy, Painted Type 1
€145.40
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFX-0021type1
SKU: hon-11409 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Silencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Section Final shorty stainless, Honda Monkey 125 2018-
€109.84
Set, Full System, Monkey 125 (No Silencer)
Can be used with TYGA Moto Maggot Silencer EXSL-8213(p)
See also EXPS-0104 For complete set