Rear sprocket aluminium gold, KTM Duke 125/200
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0113-38 - TYSR-0113-46
SKU: ktm-10009 - ktm-10017 Categories: ALL products, By product, Duke 125/200 2012- 16, KTM, Sprockets, SprocketsUpper Cowling (Street GRP), NSR250 New GP2010, Assy.
€243.42
A GP250 style upper cowling, improved for 2010. Sleeker and 300grams lighter than our previous BPFU-0005. This fairing has excellent aerodynamics for racing or road use. To be used with the parts below.
Compatible Parts:
Tyga lower cowling: BPFL-9114 Will not fit stock NSR250 lowers.
Requires headlight BPLT-0004 and screen SCRE-0084 or SCRE-0085.
TYGA no: BPFU-9005
SKU: hon-10881 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Section, Header, Left, Stainless, Yamaha R25/R3
€119.01
Section, Header, Left, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Splitpen pro arm
€2.49
This R-Clip is a simple and racey look alternative to the standard slip pin used in the rear wheel axle of all Honda Proarms.
TYGA no: NUBO-0001
SKU: hon-10119 Categories: ALL products, Honda, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Section, Pipe, Stainless, CBR150
€148.12
CBR150 Pipe. Silencer not included.
Carb Service Kit A, 20 pieces, Honda CBR400RR NC29
€40.95
Carb Service Kit A, 20 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-MV4-780)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
TYGA no: CKA-Honda-NC29
SKU: alg-10356 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, HondaTop triple clamp CNC black RACE, KTM RC390, 2014- 21
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1931
SKU: ktm-10219 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsStep kit replacement left side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement left Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0047B
SKU: KTM-10089 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390