Carbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Front Fork Preload Adjusters (Pair), ninja 400
€200.55
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0099k
SKU: kaw-10100 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsSidehanger left, Aprilia RS250 (Tyga)
€68.51
Replacement left hanger for your Aprilia RS-250 TYGA Step Kit. Complete with mounting hardware and bushes.
TYGA no: Stah-0009
SKU: apr-10031 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopBar end weight (pair), Honda RC36-2 RC30 style
€26.03
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0324
SKU: hon-11533 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon Rear hugger, Aprilia RS250
€188.86
This is a stock shaped hugger complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 250g.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCH-9007
SKU: apr-10022 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopTop triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsUndertray, Street, (GRP), MC18, GP-T
€42.91
Undertray, Street, (GRP), MC18, GP-T
This product is to be used with BPFT-9035 and BPCT-9035 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
TYGA no: BPFX-9035
SKU: hon-10731 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Triple clamp set CNC silver, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0241Â
SKU: hon-10266 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, Shop