Fuel Tank, GRP “painted OEM, HONDA VFR750R RC30
€1,481.44
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
TYGA no: BPFG-007blue/white
SKU: hon-11368 Categories: ALL products, Bodywork, Honda, Shop, VFR750R RC30Fork cap kit, Honda RVF750R RC45
€317.71
After 20 years or so of use, many RC45’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any R45 restoration and install exactly the same as the original Honda ones.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Removal and refitting of the original RC45 rebound damper rod is required, so please follow the instructions carefully.
Upper Cowling (Street GRP) MC28, Stock Shape, Painted Rothmans
€462.64
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFU-0007Painted
SKU: hon-10974 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCrankshaft bearing , Honda NSR250 MC21/MC28
€288.13
Crankshaft Bearing, Set, NSR250 MC21/28
Set of three genuine OEM KOYO main crankshaft bearings for your Honda NSR250 MC21/28 consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012set
SKU: hon-10505 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various partsPillion seat cover “Black”, KTM RC390 2022 –
€122.50
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731black
SKU: ktm-10210 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsSilencer clamp double GP 70mm (double bolt)
€34.12
Clamp, Silencer, GP, 70mm (2x Bolt)
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
This product, EXCL-0004, has a tab welded above the top silencer to secure the clamp and silencers to an exhaust stay or they are secured to the bike by use of a central position such as on the VJ22 and the Aprilia RS-250 with an otherwise completely stock bike.
If you don’t need the tab to secure to the subframe, please refer to EXCL-0005 which does not have a tab on the top and just clamps the silencers to each other.
Compatible with the following TYGA systems, when used with our 70mm silencers, EXSL-0083 and EXSL-0084:
EXCS-0006A
EXCS-0006B
EXCS-0008
EXCS-0010
TYGA no: EXCL-0004
SKU: alg-10371 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, NSR250, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, ShopSeat Support, GRP, RS250R NX5
€100.33
Seat Support, GRP, RS250R NX5
For use with seat cowling BPFT-9036 and BPCF-9036
TYGA no: BPFX-9036
SKU: hon-10978 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopExhaust section, stainless steel, Honda CBR500
€87.08
Section, Final, Stainless, CBR500, suitable for our systems EXPS-0045 and EXPS-0046
TYGA no: EXPT-0041
SKU: hon-10342 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop