Lower Cowling, GRP, NC30, Stock Shape, Painted Type 1
€441.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFL-0003Btype1
SKU: hon-11410 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Pro-arm Hub spacer 3mm
€22.56
Pro-Arm Hub Spacer, 3mm
TYGA no: TPER-0014-3
SKU: hon-10688 Categories: ALL products, By model, By product, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsWasher lock, many Honda
€7.39
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 90505-425-830
SKU: hon-11274 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopExhaustset stainless steel, oval carbon silencer w carbon cap, Honda PCX150
€552.31
Set, Pipe, Full Race System, Oval Carbon Silencer, Carbon End Cap, PCX150
This full race system has been specifically designed for the PCX150 to maximise power. Made in stainless steel with spring mounted carbon silencer with carbon end cap, this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a round carbon silencer with carbon end cap EXSL-00048
TYGA no: EXPS-0057
SKU: hon-10472 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, PCX150, ShopTriple clamp set CNC black, NC35
€673.57
riple Clamp Set, CNC Black, NC35 RVF400
These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1242
SKU: hon-10157 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopSilencer carbon/carbon cap with carbon cover, Yamaha R25 / R3
€333.51
Set, Pipe, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with carbon sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0060
SKU: yam-10049 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Carbon front fender, KTM RC125/200/390
€200.66
This lightweight carbon front fender replaces the plastic item, reduces unsprung weight and is an easy installation.
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
Weights aprox. 300 grams
TYGA no: BPCF-7131
SKU: ktm-10024 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopBattery Box Cover , Race, Carbon Clearcoated, KTM RC390 WSS300
€146.50
Battery Box Cover, Race, Carbon Clearcoated, KTM RC390 WSS300
Replacement Battery Box Cover. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFX-7631B (GRP)
BPCX-7631B (Carbon Unpolished)