Silencer clamp double GP 70mm (double bolt)
€34.12
Clamp, Silencer, GP, 70mm (2x Bolt)
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
This product, EXCL-0004, has a tab welded above the top silencer to secure the clamp and silencers to an exhaust stay or they are secured to the bike by use of a central position such as on the VJ22 and the Aprilia RS-250 with an otherwise completely stock bike.
If you don’t need the tab to secure to the subframe, please refer to EXCL-0005 which does not have a tab on the top and just clamps the silencers to each other.
Compatible with the following TYGA systems, when used with our 70mm silencers, EXSL-0083 and EXSL-0084:
EXCS-0006A
EXCS-0006B
EXCS-0008
EXCS-0010
TYGA no: EXCL-0004
SKU: alg-10371 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, NSR250, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, ShopCarbon rear hugger, Yamaha YZF-R125 2009-
€180.92
Rear Hugger (Carbon), Yamaha YZF-R125 2009-2014.
Direct replacement for original Yamaha part
Buy a complete set and it saves you money.
Front fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon side covers (pair), Honda MSX125 GROM
€76.64
Carbon side covers to decorate your MSX125 Grom. Precision molded, these fit over the stock plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanent installation.
TYGA no: BPCC-7628
SKU: MSX-10076 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopSilencer carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0067 Shorty Aluminium
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0065
SKU: alg-10258 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250Silencer carbon round, 2" x 380mm
€343.20
Silencer, Carbon, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
TYGA no: EXSL-0080
SKU: hon-11011 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Set pipe slip on maggot, CBR500
€284.06
.Set, Pipe, Slip On, CBR500, Moto Maggot silencerMade in stainless steel with spring mounted Moto Maggot silencer, this system has the MotoGP raw look and sound. (Warning, this may not comply with noise regulations for some states and territories)This system is supplied with a Moto Maggot silencer EXSL-1013<iframe width= 560 height= 315 src= https://www.youtube.com/embed/CTgM0wCAvfg frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0046Â
SKU: hon-10328 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, ShopFront fender RC211V, NC35
€71.75
Attaches to the original NC35 RVF400 mounting points and can be used with all Tyga and Honda bodywork
Compatible Parts:
All Tyga Performance and Honda OEM panel
TYGA no: BPFF-9005
SKU: hon-10124 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop