made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications

Seat Support, (GRP), MC21/MC28, GP-T

This product is to be used with subframe TYLY-0108 and seat cowlings BPFT-9033. BPFT-9133, BPCT-9033 and BPCT-9133.

Carbon chain guard, Cagiva Mito125/EV/SP525

This carbon chain guard replaces the stock plastic part which, after 20 years, is starting to look a bit faded and battered on most Mito’s.
By replacing it with this beautiful carbon part, your swing arm will look fresh and tidy!

Trim, Carbon, stock shape, Honda Dax

Belly Pan, (Carbon), MSX125. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.

We also offer the same product with in GRP and GRP/carbon, see BPFL-7128 and BPCL-7228

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>

Mount stay, VFR750F gen 4, 94-97

Mount stay, VFR750F used on:

EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer

CNC machined TYGA triple clamp set for your VFR400R/NC30.

These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!

They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.Update your bike with this great TYGA performance, KTM power part!!Model 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with decibel killers for noise reduction.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0092 for similar system qith Moto Maggot silencers.CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won’t be offended. Simply put in the comment box with your order: ‘Please supply with no TYGA logo’. Just let us know your requirements; we want to provide the best possible product for your applicationPerformance and DynographPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore. No decibel killer used.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092&lt;iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen&gt;&lt;/iframe&gt;