Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18
€459.06
Bare replacement right side chamber for EXCS-0003
Athena cylinder set with piston, set 1 Aprilia RS250 – Suzuki RGV250
€735.12 €661.61
This cylinder kit is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.
TYGA no: P40001010001
SKU: alg-10444 Categories: ALL products, Aprilia, High performance, High performance, High performance, RG125, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsUpper fairing set street RC211V, CBR250RR MC22
€451.91
This set of bodywork comprises of the parts shown below which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock MC22. It fits to the original meter and mirror stays and uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSilencer, Carbon, Four Stroke, Twin Stack, No Fittings
€285.67
Slip on diameter: 1 1/2 (38.1mm)
TYGA no: EXSL-0026(p)
SKU: hon-10859 Categories: ALL products, By model, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Stock list, all models, VFR400RR NC30Set, pipe full race system round carbon/carbon end cap silencer LH exit, VFR750F gen 4, 94-97
€1,300.90
Set, pipe full race system round carbon/carbon end cap silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0126
SKU: hon-11019 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Steering stoppers (pair) adjustable, Aprilia RS250
€34.64
CNC machined adjustable steering stoppers. These adjusters have the mounting hole positioned eccentrically to enable the piece to be rotated /- 2.5mm to find the optimum steering travel. Ideal for race bikes to limit the amount of steering available and prevent tank slappers and clearance issues with components.
TYGA no: TYLY-0076
SKU: apr-10059 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopSilencer carbon round slip on , CBR250RR MC22
€381.35
This easy to fit bolt on silencer replaces the stock heavy aluminium one. Constructed from lightweight carbon fibre with stainless steel exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
TYGA no: EXSL-0016
SKU: hon-10217 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, Silencers