Silencer carbon round, m carbon cap (4 stroke) 2
€394.60
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: EXSL-0112
SKU: alg-10069 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Carbon front fender, Honda VTR1000 Sp1/Sp2
€220.62
High quality carbon fibre gloss finish replacement part that weighs a fraction of the original heavy plastic one. Saves on unsprung weight and enhances your bike’s appearance at the same time.
Beautiful, perfect fitment and give your bike that HRC look.
Power jet #0, for NSR250 MC18/21/28
€8.44
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: TPER-0005
SKU: hon-11236 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsTYGA bike dust cover two tone blue/black Race, Gp125/moto3
€65.05
TYGA Bike Dust Cover, Red/Black, DUCATI
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0161
SKU: alg-10416 Categories: ALL products, Bike covers, By model, Merchandise, Shop, Universal partsTop Triple clamp CNC silver, NC30
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your VFR400 NC30.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race us
TYGA no: TYLY-0044
SKU: hon-10113 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Carbon fairing stay side 87mm (pair), universal
€82.47
Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.
Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and ‘R’ clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0144
SKU: hon-10537 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopFairing set street T13, Honda RVF400 NC35
€982.48
Newly introduced for 2013, the T13 body kit has been designed to be both contemporary and stylish and provide an updated alternative to our popular RC211V kits. The GRP panels this kit uses are made from high quality epoxy resin which is both light and flexible. We also make the same kit but extensive use of carbon fiber, see BPFS-0116.
This set of bodywork requires modification of the NC35 including a tank cover, a meter stay and all the other components listed below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out.
Please note some photos show the carbon version of this kit. The shape is identical to this kit.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0115
SKU: hon-10314 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSet powervalves ( 4 pieces), complete CNC billet aluminium, RGV250/RS250
€433.88
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: special002
SKU: alg-10123 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts Tags: and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes., And the risk that a broken power valve will ruin your engine!!, Best available in the market., No more problems with the “power valve pin” and having to buy new ones every 15.000 km., The set is made of CNC billet aluminium and is special coated., This set of Power valves is the latest version