Carbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopBolt, front brake rotor mounting, Honda
€2.38
Front brake mounting bolt. Bolt, M6 thread with a dome head and 6 mm. Allen key fitting
Replace those nasty corroded bolts with these Honda OEM shiny new ones, your bike deserves it! Suitable for most Honda models including:
CBR250R
MC18
MC21
MC22
MC28
NC23
NC30
NC35
RC30
RC40
RC45
etc.
TYGA no: 90106-KGH-600
SKU: hon-10500 Categories: ALL products, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Pod Filter, Down-10°, Suzuki RGV250 VJ21/VJ22
€52.66
Pod Filter, DOWN-10°, RGV250 VJ21/VJ22
Replacement Pod Filter.
For complete set please see TPER-0100
TYGA no: TPER-0100B
SKU: suz-10150 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsSilencer aluminium round 43mm, Kawasaki ZXR250 2008 –
€216.12
Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0033
SKU: kaw-10021 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersSilencer carbon/carbon end cap, round, 2" x 380mm
€426.38
Silencer carbon/carbon end cap, round, 2" x 380mm
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
* Please note that a decibel killer cannot be used with our carbon sleeved silencers.
TYGA no: EXSL-0081
SKU: hon-11012 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ22
€281.46
Bare replacement right side chamber for EXCS-0009R
Decal, Tail Cowl Cover 250R Silver, Ninja 250R 2008 -12
€2.29
Decal, Tail Cowl Cover 250R Silver, Ninja 250R 2008 -12
TYGA no: 56054-0132
SKU: kaw-10192 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopStep kit replacement right side mount assy, KTM RC125/200/390
€65.91
Tyga Step Kit Replacement Right Side Hanger Mount, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0048A
SKU: ktm-10090 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390