Carbon front fender support, Honda Monkey 125 2018-
€124.31
Carbon front fender support, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7542
SKU: msx-10431 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopCowling left red, Honda MSX125 GROM
€23.09
Cowling left red, OEM Honda part
TYGA no: 77225-K26-900ZDÂ
SKU: MSX-10289 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopKitaco reinforced clutch springs/pressure plate, Honda MSX125 / grom
€93.48
moet nog 506
TYGA no: 307-1444600
SKU: MSX-10382 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Triple clamp set CNC black, Honda NSR250 – CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC18
CNC machined TYGA lower triple clamp for the NSR250 MC18 (1988/1989) to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1245
SKU: hon-10702 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsShaft Holder, 25mm
€24.32
Shaft Holder, 25mm
This handy tool can be used to hold shafts, or any round object of 25mm diameter securely.
Just slip in the parts and clamp it all up in the vice
Manufactured from 6063 aluminum for strength and durability, it will clamp most metallic components without damage.
Carbon set, rear hugger and chain guard, KTM RC125/200/390
€235.46
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFS-0226
SKU: ktm-10205 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsFront fender stock shape, Honda NC23,NC29,NC30
€78.53
Front Fender, Carbon, NC23,NC29, NC30, Stock Shape
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPFF-0005
SKU: hon-11320 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, CBR400RR NC23, CBR400RR NC29, Hawk/Bros 400/650, Honda, Shop, VFR400RR NC30Tyre warmers (set) light weight sports
€321.00 €288.21
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These warmers are designed for 250cc, 400cc and Supermoto motorcycles, running the usual 110~120 front tyre, and 150~165 rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0005Â
SKU: alg-10143 Categories: ALL products, Aprilia, Honda, KTM, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, RVF400RR NC35, Shop, Suzuki, Tyre warmers, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZF-R25/R3