Seat set street, Aprilia RS250
€557.94
Seat set street, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2. (order alg-10015, for cooling tank)
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fit the lower TYGA cowling.
TYGA no: BPFS-0102
SKU: apr-10036 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopTop end rebuild set Cylinder C, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘C’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston D mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001C
SKU: hon-10441 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopScreen, RC36-2, RC30 Style
€52.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: SCRE-0182
SKU: hon-11517 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSeat set street GRP GP-T, Honda NSR250 MC21
€846.53
Kit, Seat Set, GRP (Street), MC21 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC21 GT-T seat cowling kits to choose from:
BPFS-0129 Street GRP
BPFS-0130 Race GRP
BPFS-0131 Street Carbon
BPFS-0132 Race Carbon
TYGA no: BPFS-0129
SKU: hon-10456 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopUpper Cowling (Street GRP), MC21, Stock Shape, Assy.
€132.42
Fiberglass replacement of the OEM shape upper
Compatible Parts:
MC21 and MC28 OEM lower cowling, Tyga lower cowling: BPFL-0001
Tyga Performance Accessories:
Requires screen SCRE-0016, SCRE-0017, SCRE-0018, SCRE-0019 and SCRE-0020
TYGA no: BPFU-0006
SKU: hon-10830 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Honda, NSR250, NSR250 MC21Throttle Cable, Close, Ninja 250R 2008 -12
€12.40
Throttle Cable, Close, Ninja 250R 2008 -12
TYGA no: 54012-0294
SKU: kaw-10208 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopRC Valve Shaft E Clip, MC28
€1.51
RC Valve Shaft E Clip, MC28
TYGA no: 90601-KV3-000
SKU: hon-11123 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Upper cowling Gp500 w carbon, Honda NSR250 MC21/MC28
€182.59
Upper Cowling (GRP), NSR250 GP500 Style
Be Michael Doohan! This upper cowling complete with carbon air scoops on the side is inspired by the NSR500 fairings from the late 1990s. Compatible with the MC21 and MC28, this fairing can either be used with stock Honda plastic side and lower fairings or the one peice TYGA Performance lower cowling, BPFL-0001. This product is to be used with a stock MC21/MC28 headlight, stock indicators and MC28 windscreen. It uses all stock mounting hardware and stock mirrors.
TYGA no: BPFU-0022
SKU: hon-10477 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, Shop