Seat pad, RC30 style replacement
€156.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSP-0013
SKU: hon-11471 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon tank protector, Honda RVF400
€104.89
This real carbon protector is designed to fit snuggly on the NC35 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-0015
SKU: hon-10363 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopSeat Cowling, (GRP), MC18, GP-T
€379.51
Seat Cowling, (GRP), MC18, GP-T
We make three versions of our NSR250. MC18, GP-T seat cowling for use for the MC18 in different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC18, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0160 (GRP,Street)
BPFS-0161(GRP Race)
BPFS-0162 (Carbon,Street)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0009) for flush fitment and new lighter registration/license plate holder ( BPFX-9133). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9035, BPFX-9335, BPCX-9035 and BPCX-9335 Undertray, MC18, GP-T
TYLY-0183 Subframe, MC18, GP-T
BPFX-9235 Seat Support, MC18, GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFT-9035
SKU: hon-10730 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsExhaust stay, Honda CBR250/CBR500
€50.22
This exhaust stay is designed to replace the rear foot peg hanger assembly and is a direct fit. Simply remove the stock hanger and replace with this lightweight elegant hanger and go racing! Fits the CBR250R, CBR300R and the CBR500 models.
TYGA no: TYLY-0074
SKU: hon-10310 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, CBR300R 2014-, CBR500R, Exhausts, Exhausts, Exhausts, Honda, ShopFront stay steel, standard, Suzuki RGV250 VJ22
€95.39
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-0261
SKU: suz-10210 Categories: ALL products, CNC parts, RGV250 VJ22, Shop, Suzuki, Various partsCarbon front chain guard, Suzuki RGV250
€56.86
Front Chain Guard, (Carbon), VJ22 RGV250
TYGA no: BPCC-0017
SKU: suz-10085 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiFairing set race T9, Honda CBR400 NC23
€597.76
CBR400 NC23 race fairing.
This kit is supplied with all additional fasteners required to mount it to a stock NC23. It fits to the original meter and supplied with a mirror stay. It uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Please note parts are supplied unpainted and in white primer.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money.
Order with confidence.