TYGA bike dust cover Black/red Force V4 Honda wing
€76.13
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0170
SKU: hon-11315 Categories: ALL products, Bike covers, By model, Honda, Merchandise, Shop, Universal parts, Various parts, VFR400RR NC30Exhaust Stay, MC18, GP-T, Left, Assy.
€68.35
Exhaust Stay, MC18, GP-T, Left, Assy.
This replacement exhaust stay is designed to be used with our GP-T kit for the MC18 and attaches to subframe TYLY-0183. Note this kit uses two stays, one for each side:
1 x TYLY-0198L for left
1 x TYLY-0198R for right
NSR250 1988 and 1989 MC18
TYGA no: TYLY-0198L
SKU: hon-10734 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC18Subframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various partsSet, 4 pieces Headlight adjustment springs
€1.82
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: exsg-0005
SKU: hon-11524 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon rear hugger “no taillight surround” stock shape, Honda Monkey 125 2018-
€162.86
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCH-7142
SKU: msx-10512 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopTYGA / Kitaco Power up kit carbon , Honda MSX125 GROM
€750.67 €675.60
TYGA/KITACO Power Up Kit, Carbon Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0041 Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0095
SKU: MSX-10305 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon frame/fairing (pair), NC35
€90.11
Carbon in fills pieces to replace the stock Honda plastic ones. Not suitable for Tyga RC211V style body kits.
Great carbon products, perfect fitment and give your bike that HRC factory look.
TYGA no: BPCC-0008
SKU: hon-10152 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopCarbon rear hugger, KTM Duke 125/200/390
€110.40
This rear hugger replaces the nasty plastic item, adds class to your ride and is an easy installation.
Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.
TYGA no: BPCH-7031
SKU: ktm-10004 Categories: ALL products, Carbon, Duke 125/200 2012- 16, Duke 390 2012-16, KTM, Shop