Silencer mesh/slash cut, slip on with carbon cover, Yamaha R25/R3
€209.75
Set, Pipe, Slip On, Mesh, Slash Cut, Yamaha R25/R3
Hand welded from stainless steel, this is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhaust cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0071
SKU: yam-10058 Categories: ALL products, Exhausts, Stock list, all models, Yamaha, YZF-R25/R3Cowling, Side, LH, Green, Ninja 250R 2008 -12
€259.23
Cowling, Side, LH, Green, Ninja 250R 2008 -12
TYGA no: 55028-0271-777
SKU: kaw-10196 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopFront Fender white, Honda MSX125 GROM
€88.02
Front Fender MSX125 Grom, White
TYGA no: 61100-K26-900ZC
SKU: MSX-10099 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopHandle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsSeat set street carbon GP-T, Honda NSR250 MC28
€1,438.61
Kit, Seat Set, Carbon (Street), MC28 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC28 GT-T seat cowling kits to choose from:
BPFS-0133 Street GRP
BPFS-0134 Race GRP
BPFS-0135 Street Carbon
BPFS-0136 Race Carbon
TYGA no: BPFS-0135
SKU: hon-10453 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, ShopTube, Carbon, Oval, 76mm x 99.5mm x 330mm
€101.38
Made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Carbon swing arm covers left, Suzuki RGV250 VJ22
€153.76
Clutch Cover, Carbon, RGV250 VJ21/VJ22
Carbon cover to replace the plastic stock one on the Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-9020L
SKU: suz-10221 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiExhaust stay GP-T, Honda VFR400 NC30
€71.27
This exhaust stay is designed to be used with our GP-T kit for the NC30 and attaches to subframe TYLY-0133. Note for NC35, use TYLY-0175
TYGA no: TYLY-0174
SKU: hon-10593 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30