Carbon front fender, Yamaha R6 2006-12
€220.20
carbon front fender,
Direct replacement for original Yamaha fender.
Let your bike stand out from the crowd.
TYGA no: BPCF-7009
SKU: yam-10018 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Seat cowling ( GRP) NX6, NSR500V
€323.38
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Front fender RC211V, NC35
€71.75
Attaches to the original NC35 RVF400 mounting points and can be used with all Tyga and Honda bodywork
Compatible Parts:
All Tyga Performance and Honda OEM panel
TYGA no: BPFF-9005
SKU: hon-10124 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon sprocket cover, Honda Monkey 125 2022 5 speed
€126.94
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCX-7742
SKU: msx-10513 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopRacing stepkit silver/BLUE adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-0027BLUE
SKU: msx-10420 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopCarbon Lower cowling, stock shape, NXA RS250R (2001- ’08)
€524.11
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Exhaust set slip on, Motogp style stainless steel maggot , Honda MSX125 GROM
€307.40
Set, Pipe, Slip On, MSX125 Grom, Moto Maggot Silencer
Made in stainless steel with spring mounted aluminium silencer, this system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot EXSL-8013
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0034
SKU: MSX-10004 Categories: ALL products, Exhausts, Exhausts, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop