Rubber Grommet type 3
€0.61
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: 5045-001-00
SKU: alg-10421 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KSR110 2005- 10, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CDB-killer for stainless exhaust,
€28.57
Decibel Killer, Silencer, Stainless, Oval/Carbon End Cap, Spring Mount. Note, this is only suitable for stainless silencer type EXSL-1142, EXSL-0057L and EXSL-0057R
NOT FOR USE with EXSL-0042
TYGA no: EXDK-0002
SKU: MSX-10283 Categories: ALL products, Exhausts, Exhausts, Exhausts, Honda, KTM, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSet pipe full race system WSS300 (no silencer), KTM Duke 390
€650.45
Set, Pipe, Race System, WSS300, No Silencer, KTM 390 Duke
This exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
Note, this is a system with NO silencer
For complete system with silencer please see EXPS-0142
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Lower Cowling, Race, Carbon Clearcoated, KTM RC390 WSS300
€477.30
Lower Cowling, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFL-7531 (GRP)
BPCL-7531U (Carbon Unpolished)
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
€920.57
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below and has a special TYGA designed triple beam LED headlight unit subtly located in what would normally be the front air duct. All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0196 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0195
SKU: hon-11055 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Silencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom
€313.65
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom, no fittings
See also similar product EXSL-0059 (silencer, short type).
Cowling center white, Honda MSX125 GROM
€17.03
Cowling centre white, OEM Honda part
TYGA no: 77230-K26-900ZB
SKU: MSX-10095 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSet, mirror blanking plates L&R CNC black, KTM RC series
€57.41
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TYLY-1185
SKU: ktm-10191 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various parts