Lower cowling GP-T, Honda RVF400 NC35
€216.35
Lower Cowling (GRP), NC35 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0145
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9134.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFC-0038 painted
SKU: hon-10598 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Tyga Step Kit Replacement Toe Piece, Black, Assy.
€14.83
Replacement toe piece for your TYGA Step Kit.
Can also be used for fitting to almost any standard foot control lever to replace bent and damaged part by simply drilling a 6.3mm hole and countersinking on the back side of the lever.
Use Loctite to secure.
Comes with mounting bolt.
Fairingstay stock, CBR250RR MC22
€85.34
Upper / Mirror Stay for MC22. Direct replica of the standard stay for simple replacement of bent, or old and ugly original item. Weight is comparable to standard item, but quality of welding is improved.
HRC sticker 65mm (type 1)
€2.59
This product is a genuine OEM Honda HRC sticker. Very high quality. Excellent inks and printing with strong adhesive so no need to clearcoat over. Size is approx. 110 mm. X 40 mm.
TYGA no: 86862-KZZ-J00
SKU: alg-10422 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Hawk/Bros 400/650, Honda, Merchandise, MSX125 2021-, MSX125 GROM, MSX125SF 2016 -2020, New OEM Honda parts, NR750, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RC36-2 -> RC30 replica products, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2Bearing, Piston, MC28
€13.44
Bearing, Piston, MC28
TYGA no: 91102-KV3-771
SKU: hon-11117 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Blank, Booster Bottle, MC21 (pair)
€6.26
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: TYLY-0074
SKU: hon-11255 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopLower cowling (GRP) yellow, Honda MSX125SF GROM
€332.31
Lower cowling (GRP) yellow, Honda MSX125SF GROM
Lower Cowling, (GRP), yellow, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428Y
SKU: msx-10387 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopUpper Cowling (Street GRP) MC28, Stock Shape, Painted Rothmans
€462.64
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFU-0007Painted
SKU: hon-10974 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, Silencers