TYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsLower cowling (GRP) stock shape, Honda NSR250 MC18
€263.33
Lower Cowling (GRP), Stock Shape, 1989 NSR250, MC18
Replacement part, to be used with Upper Fairings BPFU-9123 and BPFU-9222
See also BPFS-0173 and BPFS-0174 for complete sets with upper, lower fairing and screen.
TYGA no: BPFL-9122
SKU: hon-10917 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopBracket front brake CNC black 84mm Brembo, Kawasaki Ninja 400
€46.98
Bracket, Front Brake, 40 mm Brembo Conversion, Black, Kawasaki Ninja 400
CNC machined brake caliper support for your Kawasaki Ninja 400.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your Ninja 400.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Torque Setting: 35Nm
TYGA no: TYLY-1210
SKU: kaw-10154 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Prox top end bearing, Suzuki RGV250 / Aprilia Rs250
€12.14
ProX Quality product
size: 16 x 20 x 17.7 mm
TYGA no: 213349.0
SKU: alg-10103 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiO Ring, Water Splitter, MC28
€4.72
O Ring, Water Splitter, MC28
TYGA no: 91301-GK1-003
SKU: hon-11106 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set pipe, Full race with round stainless silencer NEW, Kawasaki ZXR250 2013 –
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Round Stainless Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted round Stainless silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an round Stainless silencer EXSL-0064
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0079
SKU: kaw-10062 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Kit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21
€681.48
Kit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21
Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21
Consists of the following products ( also available seperatly)
BPFU-0019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen
TYGA no: BPFS-0191
SKU: suz-10120 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Silencer right shorty, stainless 70mm
€89.99
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0106R
SKU: yam-10087 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, Yamaha