Section final stainless exhaust, Honda MSX125SF GROM 2016 –
€65.88
Section, Final, Stainless, MSX125SF Grom, suitable for our high level systems EXPS-0066 and EXPS-0067.
For EXPS-0041, EXPS-0042, EXPS-0052 and EXPS-0065. please see EXPT-0037
Note, this section moves the silencer to a more rearward position and is suitable for the second generation (MSX125SF) Grom when used with stay BPSY-0176. Not suitable for first generation MSX125 Grom.
TYGA no: EXPT-0065
SKU: MSX-10337 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopSilencer clamp double GP 70mm (double bolt)
€34.12
Clamp, Silencer, GP, 70mm (2x Bolt)
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
This product, EXCL-0004, has a tab welded above the top silencer to secure the clamp and silencers to an exhaust stay or they are secured to the bike by use of a central position such as on the VJ22 and the Aprilia RS-250 with an otherwise completely stock bike.
If you don’t need the tab to secure to the subframe, please refer to EXCL-0005 which does not have a tab on the top and just clamps the silencers to each other.
Compatible with the following TYGA systems, when used with our 70mm silencers, EXSL-0083 and EXSL-0084:
EXCS-0006A
EXCS-0006B
EXCS-0008
EXCS-0010
TYGA no: EXCL-0004
SKU: alg-10371 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, NSR250, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, ShopShroud inner left,Honda MSX125 GROM
€6.86
Shroud inner left OEM Honda part
TYGA no: 83570-K26-900
SKU: MSX-10025 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopTriple clamp set CNC silver, NC35
€673.57
CNC machined TYGA triple clamp set for your RVF400 NC35.
These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0242
SKU: hon-10158 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopTop triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon swing arm shark fin guard
€56.52
Universal , Swing Arm, Carbon Shark Fin Guard
This tough carbon shark fin is designed to fit on the bottom of most swing arms and is supplied with mounting hardware. Depending on the design, the swing arm itself can be drilled and tapped (for cast type) or if box section, then drilled through and the rivet nuts supplied in the kit can then be installed to make for a professional and trouble free installation.
TYGA no: BPCX-0005
SKU: alg-10276 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Dax and Chaly, Desmosedici RR, Ducati, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, KSR110 2005- 10, KTM, Mito 125, Monster, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, RVF750 RC45, Sprockets, Suzuki, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250C, ZXR400LSection, Collector, Intermediate, Upper, Stainless, VFR750F, 3rd Gen, 90-93
€66.48
TYGA no: EXPT-6151
SKU: hon-11347 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Pod Filter, UP-10°, Suzuki RGV250 VJ21/VJ22
€52.66
Pod Filter, UP-10°, RGV250 VJ21/VJ22
Replacement Pod Filter.
For complete set please see TPER-0100
TYGA no: TPER-0100A
SKU: suz-10149 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various parts