Tank cover front, CBR250RR MC22
€101.04
This product is part of set BPFX-9125, (the other part being BPFX-9125R). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.
TYGA no: BPFX-9225F
SKU: hon-10211 Categories: ALL products, Bodywork, By model, CBR250RR MC22, Honda, ShopCarbon race airbox lid, Honda NSR250 MC21/MC28
€210.89
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9010
SKU: hon-10323 Categories: ALL products, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCowling center white, Honda MSX125 GROM
€17.03
Cowling centre white, OEM Honda part
TYGA no: 77230-K26-900ZB
SKU: MSX-10095 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFuel Tank, GRP, NSR250, MC28, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-9001Painted
SKU: hon-10971 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersUpper cowling track , Honda VFR750 RC30
€253.86
Upper cowling “track”, Honda VFR750 RC30 (hon-10568)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Set exhaust with header, race system without silencers
€557.94
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0094
SKU: ktm-10095 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopCarbon chain guard, Cagiva Mito125/EV/SP525
€95.39
Carbon chain guard, Cagiva Mito125/EV/SP525
This carbon chain guard replaces the stock plastic part which, after 20 years, is starting to look a bit faded and battered on most Mito’s.
By replacing it with this beautiful carbon part, your swing arm will look fresh and tidy!
Under Cowl, Belly Exhaust Type, (GRP), White, MSX125
€196.87
Under Cowl, Belly Exhaust Type, (GRP), White, MSX125
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFL-7328 W
SKU: MSX-10367 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop