RC valve cable kit, 300cc big bore
€42.63
RC valve cable kit for the 300cc big bore kit.
2x Lower cylinder cables.
TYGA no: TPER-0035
SKU: hon-10835 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Set full race system under belly with short stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
.Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Short
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( A db killer is included)
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0064 Stainless, Underbelly, with long silencer
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0068
SKU: MSX-10348 Categories: ALL products, Exhausts, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopCarbon cover (right), (4 speed engine) Honda Monkey 125 2018- 2021
€93.94
Engine Cover (right) Carbon, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7642
SKU: msx-10429 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopLower cowling Gp2010, Honda NSR250 MC21/MC28
€241.68
This product is almost identical to BPFL-9014, just wider lip to match the upper BPFU-9005.
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9005 but can also be used with BPFU-9012 and BPFU-9022.
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9114
SKU: hon-10237 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon stone guard, Honda NSR250 MC21
€295.47
Stone Guard, Carbon/Kevlar, NSR250, MC21
NSR250 MC21 stone guard modelled on the HRC F3 component, this carbon and Kevlar TYGA version is both strong and lightweight and enhances your bike’s appearance. Can be used on street bikes using pod filters* as well as full on race bikes. Probably fits the MC28 too.
*Note that this product is designed for race bikes so be prepared to relocate components such as the air solenoids etc.
TYGA no: BPCX-9012
SKU: hon-10655 Categories: ALL products, Bodywork and carbon, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopTop Triple clamp CNC silver kit, Honda NSR250 MC18/MC21/MC28
€218.46
Top Triple Clamp Set, CNC Silver, MC21
CNC machined TYGA top triple clamp with detachable ingitionswitch/lock holder for your NSR250.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder TYLY-0141 is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0441Â
SKU: hon-10270 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopSet, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted round Stainless silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an round Stainless silencer EXSL-0064
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0098
SKU: kaw-10070 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Seal, sprocket carrier, MC21
€11.41
Seal, sprocket carrier, MC21
TYGA no: 91255-KV3-701
SKU: hon-11077 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21