Handle bar set silver, Honda CBR500
€234.92
Handlebar Set, Silver, CBR500R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Black, order TYLY-1669
Silver, order TYLY-0669
Please note the steering is limited when using this product and as a result, the steering lock cannot be used.
Carbon upper cowling GP-T, Honda NSR250 MC21/MC28
€590.40
Upper Cowling Street (Carbon), NSR250, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NSR250 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPCL-9033 and other mounting hardware it comprises set BPFS-0138.
This cowling is supplied with a plastic bung to mount to the meter stay.
See also BPFU-9033 for GRP (Glass reinforced plastic) version of this product.
Compatible parts:
BPCL-9033 Lower Cowling
TYLY-0121 Upper Stay
BPLT-0027 Headlight
BPSY-0155 Fairing Adaptor Stay
BPSY-0143A Side Stay Kit
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPCU-9033
SKU: hon-10542 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopTriple clamp set CNC silver, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0241Â
SKU: hon-10266 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopTriple clamp set CNC black, Suzuki SV650
€573.36
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
Cowling Right red, Honda MSX125 GROM
€23.09
Cowling right, OEM Honda part
TYGA no: 77215-K26-900ZDÂ
SKU: MSX-10288 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopHEL rear brake line Brembo 84mm, Honda MSX125 GROM
€76.14
Kit includes:
1x HEL Brake Line
4x Sealing Washer
1x M10x1.25 Banjo Bolt
1x M10x1.00 Banjo Bolt
20 degree side bend banjo goes to master cylinder. 20 degree side bend banjo goes to caliper.
See pictures for correct fitting.
Route the hose through the standard brake hose retaining clips
Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.
For ease of bleeding, the caliper should be removed and orientated so that the bleed nipple is at the highest point.
TYGA no: BLSR-0010Â
SKU: MSX-10131 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsUpper Cowling (Street GRP) MC21, Stock Shape, Painted Rothmans
€462.64
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFU-0006Painted
SKU: hon-11282 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersTop triple clamp CNC black RACE, KTM RC390, 2014- 21
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1931
SKU: ktm-10219 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all models